Bluetooth - Yealink SIP-T48G User Manual

User Guide for the SIP-T48G IP Phone
To enable dual headset via web user interface:
Click on Features->General Information.
1.
Select Enabled from the pull-down list of Dual Headset.
2.
Click Confirm to accept the change.
3.
Note
Dual headset is configurable via web user interface only.

Bluetooth

The SIP-T48G IP phone supports Bluetooth. Bluetooth enables low-bandwidth wireless
connections within a range of 10 meters (32 feet). The best performance is in the 1 to 2 meters
(3 to 6 feet) range.
You can activate/deactivate the Bluetooth mode on the phone, and then pair and connect the
Bluetooth device (Bluetooth headset or Bluetooth-Enabled mobile phone) with your phone. If
you connect your Bluetooth-Enabled mobile phone to the IP phone, you can synchronize the
mobile contacts to the IP phone. You can scan and pair up to 60 Bluetooth devices with your
phone. However, only one device can be connected at a time. You can also disconnect and
delete your Bluetooth device from the phone.
Ensure that the Bluetooth USB dongle BT40 is properly connected to the USB port at the back of
Note
the IP phone. For more information, refer to
Not all mobile phone supports this function. Contact your system administrator for more
information.
The Bluetooth device will disconnect from your phone in the following introduced scenarios:
100
Phone Installation on page 18.