Power Saving - Yealink SIP-T48G User Manual

User Guide for the SIP-T48G IP Phone
The IP phone will automatically set the custom pictures you upload as the screen saver,
and display these pictures alternately.
Tap the Save soft key to accept the change or
5.
Screen saver is configurable via web user interface at the path Settings->Preference.

Power Saving

The power saving feature is used to turn off the backlight and screen to conserve energy. The IP
phone enters power-saving mode after it has been idle for a certain period of time.
The IP phone will exit power-saving mode if one of the following phone events occurs:
Press any key.

Tap the touch screen.

Pick up/hang up the handset.

There is an incoming call.

A new prompt (e.g., missed call, new voice mail or forwarded call).

The status of BLF key changes.

If the screen saver is enabled on your phone, power-saving mode will still occur.
You can configure the following power-saving settings:
Office Hour

Idle Timeout (minutes)

The office hour and idle timeout (minutes) settings work only if the power saving feature is
enabled.
Power saving is configurable via web user interface only.
Note
48
to cancel.