Anonymous Call - Yealink SIP-T48G User Manual

User Guide for the SIP-T48G IP Phone
The GPickup appears on the on-screen keypad.
Tap GPickup on your phone when a phone in the group receives an incoming call.
2.
The call is answered on your phone.
You can also configure a DSS key as a group pickup key via phone user interface or web user
interface. Once configured, you can pick up a call by tapping the group pickup key directly. For
more information, refer to
Note
The directed call pickup code and group call pickup code are predefined on the system server.
Contact your system administrator for more information.
The call pickup code configured on a per-line basis takes precedence over that configured on a
global basis.

Anonymous Call

You can use anonymous call to block your identity and phone number from appearing to the
called party when you call someone. For example, you want to call to consult some of the
services, but don't want to be harassed. Anonymous call is configurable on a per-line basis. You
can also configure the phone to send anonymous call on/off code to the server to
activate/deactivate anonymous call on the server side.
Note
Anonymous call is not available on all servers. Contact your system administrator for the
anonymous call on code and off code.
To configure anonymous call via phone user interface:
Tap ->Features->Anonymous.
1.
Tap the desired line.
2.
Tap the On radio box of the Local Anonymous field.
3.
(Optional.) Tap the On Code or Off Code radio box of the Send Anony Code field.
4.
180
DSS Keys on page 108.