Call Completion - Yealink SIP-T48G User Manual

User Guide for the SIP-T48G IP Phone
Auto redial is configurable via web user interface at the path Features->General Information.
To use auto redial:
When the called party is busy, the following prompt will appear on the touch screen of the
phone:
Tap the OK soft key to activate auto redial.
1.
The touch screen prompts the following:
Wait for the designated period of time or tap the OK soft key to redial the phone number.
2.
The phone will retry as many times as configured until the called party is idle.

Call Completion

You can use call completion to notify the caller who failed to reach a desired party when the
party becomes available to receive a call.
To enable call completion via phone user interface:
Tap ->Features->Call Completion.
1.
142