Answering Calls - Yealink SIP-T48G User Manual

User Guide for the SIP-T48G IP Phone
With the optional headset connected, press
-
Enter the desired number.
Press
Note
To permanently use the headset mode, refer to
The SIP-T48G IP phone can handle multiple calls at a time. However, only one active call (the call
that has audio associated with it) can be in progress at any time. The SIP-T48G IP phone can
handle a maximum of 50 calls at one time.
To place multiple calls:
You can have more than one call on your SIP-T48G IP phone. To place a new call during an
active call, do one of the following:
- Tap the line key. The active call is placed on hold.
Enter the desired number.
Press
Press
-
Tap the New Call soft key.
Enter the desired number.
Press
You can tap the desired call, and then tap the Resume soft key to retrieve it.
Note
If multiple accounts are registered on the phone, you can first tap the desired line key on the idle
screen or tap the desired line from the status bar on the dialing screen, and then you can use the
selected account to place a call.

Answering Calls

When you are not in another call, you can answer a call in one of three ways:
Using the handset

Using the speakerphone

Using the headset

You can reject incoming calls by pressing the X key or tapping the Reject soft key to stop the
Note
phone from playing ring tone. You can also activate the Do Not Disturb mode to reject the
incoming calls without ringing on your phone. For more information, refer to
(DND) on page 148.
You can forward incoming calls to someone else by tapping the Forward soft key. For more
information, refer to
136
, , or tap Send.
, , or tap Send.
or tap the Hold soft key to place the original call on hold.
, , or tap Send.
Call Forward on page 153.
to activate the headset mode.
Headset Use on page 98.
Do Not Disturb