Using Intercom - Yealink SIP-T48G User Manual

Intercom Barge
You can enable or disable the phone to automatically answer an incoming intercom call while
there is already an active call on the phone. If Intercom Barge is enabled, the phone will
automatically answer the intercom call and place the active call on hold. If Intercom Barge is
disabled, the phone will handle an incoming intercom call like a waiting call. Intercom Barge is
disabled by default.
To enable the phone to receive a new incoming call when it has an active call, make sure that call
Note
waiting feature is enabled on the phone in advance. For more information, refer to
on page 165.
To configure intercom features via phone user interface:
Tap ->Features->Intercom.
1.
Make the desired changes.
2.
Tap the Save soft key to accept the change or
3.
Intercom features are configurable via web user interface at the path Features->Intercom.

Using Intercom

You can use the intercom key in the following ways:
Place a call to the target extension

Pick up an incoming call of the target extension

Note
To use the intercom key to pick up an incoming call, make sure the intercom subscription feature
is enabled. For more information, contact your system administrator.
Advanced Phone Features
Call Waiting
to cancel.
207