Activating The Wi-Fi Mode; Connecting To The Wireless Network - Yealink SIP-T48G User Manual

Activating the Wi-Fi Mode

When Wi-Fi USB dongle WF40 is connected to the USB port at the back of the IP phone, the
screen will prompt "Wi-Fi adapter is added, scanning available wireless networks right now?".
You can tap OK to activate Wi-Fi mode directly and scan Wi-Fi devices automatically.
To activate the Wi-Fi mode via phone user interface:
Tap ->Basic->Wi-Fi.
1.
Tap the On radio box of the Wi-Fi field.
2.
The IP phone scans the available wireless networks in your area.

Connecting to the Wireless Network

Three ways to connect IP phone to the wireless network:
Manually connect to an available wireless network

Wi-Fi Protected Setup (WPS)

Manually add a wireless network

Getting Started
27