Yealink SIP-T48G User Manual page 168

User Guide for the SIP-T48G IP Phone
To configure the call forward mode via web user interface:
Click on Features->Forward&DND.
1.
In the Forward block, mark the desired radio box in the Mode field.
2.
Click Confirm to accept the change.
3.
Note Call forward mode is configurable via web user interface only.
To activate call forward in phone mode:
Tap ->Features->Call Forward or press
1.
Tap the desired forwarding type.
2.
Depending on your selection:
3.
If you tap Always Forward:
a)
Tap the On radio box of the Always Forward field.
1)
Enter the destination number you want to forward all incoming calls to in the
2)
Forward to field.
154
when the phone is idle.