Call Mute; Mute A Call - Yealink SIP-T48G User Manual

Tap the Save soft key to accept the change or
6.
Recall key is configurable via web user interface at the path Dsskey->Line key.

Call Mute

You can mute the microphone of the active audio device during an active call so that the other
party cannot hear you. You can also mute the microphone while dialing so that the other party
cannot hear you when the call is set up. It helps prevent the other party from hearing the
informal discussion when auto answer is enabled on his/her phone.
Call mute applies to all modes (Handset, Headset and Speakerphone).
Keep Mute
Normally, the mute feature is deactivated when the active call ends. Keep mute feature enables
you to make the mute state of your phone persist across calls. When keep mute is enabled and
you press the MUTE key, the phone stays in the mute state until you un-mute the microphone
or until the phone restarts. It helps prevent the other party from hearing the noise coming from
your room when auto answer is enabled on your phone. When you mute the phone in an idle
state or any other states, the mute key LED illuminates solid red and the icon
status bar..
Note
Keep mute should be pre-configured by your system administrator.

Mute a Call

To mute a call:
Press
1.
during an active call.
Basic Call Features
to cancel.
appears on the
145