Yealink SIP-T48G User Manual page 140

User Guide for the SIP-T48G IP Phone
number matches the dial now string, the number will be dialed out automatically. For example, a
dial now rule is configured as "2xx", any entered three-digit string beginning with 2 will then be
dialed out automatically on the phone.
To add a dial now rule via web user interface:
Click on Settings->Dial Plan->Dial Now.
1.
Enter the desired value (e.g., 2xx) in the Rule field.
2.
Enter the desired line ID in the Account field or leave it blank.
3.
For more information on the valid values for the Account field, refer to
page 124.
Click Add to add the dial now rule.
4.
When you enter the number "234" using the keypad, the phone will dial out "234"
automatically without the pressing of any key.
You can also edit or delete the dial now rule, refer to
Note
information.
Time Out for Dial Now Rule
You can configure the delay time for dial now rules. That is, you can configure your phone to
automatically dial out the phone number which matches a dial now rule, after the designated
delay time.
To configure the delay time for dial now rule via web user interface:
Click on Features->General Information.
1.
Enter the time between 0 and 14 (seconds) in the Time Out for Dial Now Rule field.
2.
126
Replace Rule
Replace Rule on page 124
on
for more