Network Conference - Yealink SIP-T48G User Manual

User Guide for the SIP-T48G IP Phone
The touch screen prompts "Are you sure to remove XX?".
Tap OK to remove the party.
Press
-
cannot hear you.
Tap to mute the party. The muted party can hear everyone, but no one can hear the
-
muted party. The icon
Tap the End Call soft key to drop the conference call.
-

Network Conference

You can use network conference feature on the SIP-T48G IP phone to conduct a conference with
multiple participants.
This feature allows you to perform the following:
Join two calls together into a conference call.

Invite another party into an active conference call.

To use this feature, contact your system administrator for the network conference URI in
advance.
To configure network conference via web user interface:
Click on Account->Advanced.
1.
Select the desired account from the pull-down list of Account.
2.
Select Network Conference from the pull-down list of Conference Type.
3.
Enter the conference URI (e.g., conference@example.com) in the Conference URI field.
4.
168
to mute the conference call, all other participants can hear each other, but they
changes to .