Yealink SIP-T48G User Manual page 130

User Guide for the SIP-T48G IP Phone
Usage: Tap the Forward key to forward an incoming call to the number specified in the Value
field.
Note
If the Value field is left blank, the
an incoming call.
Transfer
When there is an active call on the phone, you can use this key feature to handle the call
differently depending on the transfer mode assigned to the DSS key.
Dependencies:
Usage:
When the transfer mode on DSS key is Blind Transfer, tap the Transfer key to complete

the blind transfer to the number specified in the Value field.
When the transfer mode on DSS key is Attended Transfer, tap the Transfer key to dial

out the number specified in the Value field, and then perform the attended or
semi-attended transfer.
When the transfer mode on DSS key is New Call, tap the Transfer key to place a new call

to the number specified in the Value field.
Note Transfer mode via DSS key is configurable via web user interface at the path
Features->Transfer->Transfer Mode via Dsskey.
If the Value field is left blank, the
Transfer soft key during a call. For more information, refer to
Hold
You can use this key feature to place an active call on hold or retrieve a held call.
Dependencies:
Usage:
Tap the Hold key during an active call to place the call on hold.
1.
Tap the Hold key again to retrieve the held call.
2.
116
Key Type (Forward)
Label (key label displayed on the touch screen)
Value (the number you want to forward to)
Forward
Type (Key Event)
Key Type (Transfer)
Label (key label displayed on the touch screen)
Value (the number you want to transfer to)
Transfer
Type (Key Event)
Key Type (Hold)
Label (key label displayed on the touch screen)
key performs the same as Forward when receiving
key performs the same as the TRANSFER key or the
Call Transfer on page 163.