Auto Answer - Yealink SIP-T48G User Manual

User Guide for the SIP-T48G IP Phone
You can use auto answer feature to automatically answer an incoming call using the
speakerphone. Auto answer is configurable on a per-line basis.
You can choose to mute the local microphone when an incoming call is answered automatically.
To configure auto answer via phone user interface:
Tap ->Features->Auto Answer.
1.
Tap the On radio box of the desired registered line.
2.
Tap the Save soft key to accept the change or
3.
The icon
for the default account.
Auto answer is configurable via web user interface at the path Account->Basic.
Auto answer only takes effect when there is no other call in progress on the phone. If there is a
Note
call in progress, the second incoming call cannot be automatically answered after ending the
current call by default. If you want to make the phone automatically answer the incoming call
after ending all calls, contact your system administrator for more information.
138
appears on the touch screen only when the auto answer feature is enabled
to cancel.