Yealink SIP-T48G User Manual page 149

You can also enter the number using the on-screen keypad.
Press
3.
The # key is configured as a send key by default. You can also set the * key as the send key, or
set neither. For more information, refer to the
You can also tap the History soft key or the Directory soft key to search for an entry or contact
after picking up the handset, and then tap the desired entry or contact to place a call.
You can also dial using the SIP URI or IP address. To obtain the IP address of a phone, press the
Note
OK key when the phone is idle. The maximum SIP URI or IP address length is 32 characters. For
example, SIP URI: 3606@sip.com, IP: 192.168.1.15 or 192*168*1*15.
Your phone may not support direct IP dialing. Contact your system administrator for more
information.
To place a call using the hands-free (speakerphone) mode:
Do one of the following:
- With the handset on-hook, press
Enter the desired number.
Press
- With the handset on-hook, enter the desired number.
Press
To place a call using the headset:
Do one of the following:
- With the optional headset connected, press
Tap the line key to obtain a dial tone.
Enter the desired number.
Press
, , or tap Send.
, or tap Send.
, , or tap Send.
, , or tap Send.
Key As Send on page 57.
or tap the line key to obtain a dial tone.
to activate the headset mode.
Basic Call Features
135