Yealink SIP-T48G User Manual page 117

Pairing and Connecting the Bluetooth-Enabled Mobile Phone
Before you pair a Bluetooth-Enabled mobile phone, check the Bluetooth mode on the
Bluetooth-Enabled mobile phone to make sure that the Bluetooth-Enabled mobile phone is
discoverable.
To pair and connect the Bluetooth-Enabled mobile phone with your phone:
Tap ->Basic->Bluetooth.
1.
Activate the Bluetooth mode.
2.
Tap the desired Bluetooth-Enabled mobile phone.
3.
The IP phone will prompt the connect passkey on the touch screen, as shown below:
Make sure your mobile phone is showing the same passkey, and then tap OK on both
4.
mobile phone and IP phone.
Then the IP phone will prompt "Would you like to sync phone contacts temporarily?".
(Optional.) Tap OK to enable the mobile contacts sync feature and the IP phone will sync
5.
the mobile contacts temporarily, or tap Cancel to disable mobile contacts sync feature and
the IP phone will not sync the mobile contacts. If you tap Cancel, you can also manually
enable the mobile contacts sync feature on the IP phone. For more information, refer to
Customizing Your Phone
103