Yealink SIP-T48G User Manual page 236

User Guide for the SIP-T48G IP Phone
Click on Advanced, and then select Shared Call Appearance from the pull-down list of
2.
Shared Line.
Enter the desired number in the Number of line key field.
3.
This field appears only if Auto Linekeys is enabled.
The default value is 1. In this example, the value is set to 2.
Click Confirm to accept the change.
4.
The phone A will automatically configure the line keys from the first unused DSS key, according
to the configured number in the Number of line key field.
To configure the shared line settings and the number of line key on phone B via web user
interface:
Register the alternate account 4603_1.
1.
222