Power Saving - Yealink SIP-T46S User Manual

The IP phone will automatically set the built-in picture as the screen saver.
- If you select Custom.
The IP phone will automatically set the custom pictures you upload as the screen saver,
and display these pictures alternately.
Press the Save soft key to accept the change or the Back soft key to cancel.
5.
Screen saver is configurable via web user interface at the path Settings->Preference.

Power Saving

The power saving feature is used to turn off the backlight and screen to conserve energy. The IP
phone enters power-saving mode after it has been idle for a certain period of time.
The IP phone will exit power-saving mode if one of the following phone events occurs:
Press any key.

Pick up/hang up the handset.

There is an incoming call.

A new prompt (e.g., missed call, new voice mail or forwarded call).

The status of BLF key changes.

If the screen saver is enabled on your phone, power-saving mode will still occur.
You can configure the following power-saving settings:
Office Hour

Idle Timeout (minutes)

The office hour and idle timeout (minutes) settings work only if the power saving feature is
enabled.
Note Power saving is configurable via web user interface only.
Customizing Your Phone
43