Activating The Wi-Fi Mode; Connecting To The Wireless Network - Yealink SIP-T46S User Manual

Activating the Wi-Fi Mode

When
Wi-Fi USB dongle WF40 is connected to the USB port at the back of the IP phone, the
screen will prompt "
now?". You can press the OK soft key to activate
automatically.
To activate the Wi-Fi mode via phone user interface:
Press Menu->Basic->Wi-Fi.
1.
Press
2.
Press the Save soft key.
3.
The IP phone scans the available wireless networks in your area.

Connecting to the Wireless Network

Three ways to connect SIP-T46S IP phone to the wireless network:
Manually connect to an available wireless network

Wi-Fi Protected Setup (WPS)

Manually add a wireless network

Wi-Fi
adapter has been added, scanning the
or , or the Switch soft key to select On from the Wi-Fi field.
available wireless network
Wi-Fi
mode directly and scan
Getting Started
LCD
right
Wi-Fi
devices
29