Answering Calls - Yealink SIP-T46G Manual

User Guide SIP-T46G IP Phone
- With the handset on-hook, enter the desired number using the keypad.
Press
To place a call using the headset:
Do one of the following:
- With the optional headset connected, press
Press the line key to obtain a dial tone.
Enter the desired number using the keypad.
Press
- With the optional headset connected, press
Enter the desired number using the keypad.
Press
To place multiple calls:
You can have more than one call on your SIP-T46G IP phone. To place a new call
during an active call, do one of the following:
- Press the line key. The active call is placed on hold.
Enter the desired number using the keypad.
Press
- Press
Press the New Call soft key.
Enter the desired number using the keypad.
Press
You can press
Resume soft key to retrieve the desired call.

Answering Calls

When you are not in another call, you can answer a call in three ways:
Using the handset
Using the speakerphone
Using the headset
Note
You can ignore incoming calls by pressing the X key, the Reject soft key or the Silence
soft key. You can also activate Do Not Disturb mode to ignore all incoming calls without
ring on your phone. For more information, refer to
You can forward incoming calls to someone else by pressing the Forward soft key. For
more information, refer to
70
, , or the Send soft key.
, , or the Send soft key.
, , or the Send soft key.
, , or the Send soft key.
or the Hold soft key to place the original call on hold.
, , or the Send soft key.
or to switch between the calls, and then press the
Call Forward
to activate the headset mode.
to activate the headset mode.
Do Not Disturb (DND)
on page 79.
on page 78.