Bluetooth Headset - Yealink SIP-T27G User Manual

https://arttel.ru/
User Guide for the SIP-T27G IP Phone
Note

Bluetooth Headset

Note
72
https://arttel.ru/shop/ip-telefony/yealink-sip-t27g
To enable dual headset via web user interface:
Click on Features->General Information.
1.
Select Enabled from the pull-down list of Dual Headset.
2.
Click Confirm to accept the change.
3.
Dual headset is configurable via web user interface only.
The SIP-T27G IP phone supports Bluetooth. Bluetooth enables low-bandwidth wireless
connections within a range of 10 meters (32 feet). The best performance is in the 1 to 2 meters
(3 to 6 feet) range.
You can activate/deactivate the Bluetooth mode on the phone, and then pair and connect the
Bluetooth headset with your phone. You can scan and pair up to 60 Bluetooth headsets with
your phone. However, only one headset can be connected at a time. You can also disconnect
and delete your Bluetooth headset from the phone.
Ensure that the Bluetooth USB dongle is properly connected to the USB port at the back of the IP
phone. For more information, refer to Phone Installation on page 16.