Table of Contents
Advertisement
Chapter 16
| Multicast Filtering
Multicast VLAN Registration
Configuring MVR
Global Settings
Use the Multicast > MVR (Configure Global) page to configure proxy switching and
the robustness variable.
Parameters
These parameters are displayed:
◆
Proxy Switching – Configures MVR proxy switching, where the source port
acts as a host, and the receiver port acts as an MVR router with querier service
enabled. (Default: Enabled)
When MVR proxy-switching is enabled, an MVR source port serves as the
■
upstream or host interface, and the MVR receiver port serves as the querier.
The source port performs only the host portion of MVR by sending
summarized membership reports, and automatically disables MVR router
functions.
Receiver ports are known as downstream or router interfaces. These
■
interfaces perform the standard MVR router functions by maintaining a
database of all MVR subscriptions on the downstream interface. Receiver
ports must therefore be configured on all downstream interfaces which
require MVR proxy service.
When the source port receives report and leave messages, it only forwards
■
them to other source ports.
When receiver ports receive any query messages, they are dropped.
■
When changes occurring in the downstream MVR groups are learned by
■
the receiver ports through report and leave messages, an MVR state change
report is created and sent to the upstream source port, which in turn
forwards this information upstream.
■
When MVR proxy switching is disabled:
■
Any membership reports received from receiver/source ports are
forwarded to all source ports.
When a source port receives a query message, it will be forwarded to all
■
downstream receiver ports.
When a receiver port receives a query message, it will be dropped.
■
◆
Robustness Value – Configures the expected packet loss, and thereby the
number of times to generate report and group-specific queries. (Range: 1-255;
Default: 2)
This parameter is used to set the number of times report messages are sent
■
upstream when changes are learned about downstream groups, and the
number of times group-specific queries are sent to downstream receiver
ports.
This parameter only takes effect when MVR proxy switching is enabled.
■
– 504 –
Advertisement
Table of Contents
