Displaying 802.1X Global Settings; Configuring 802.1X Global Settings; Figure 3-50 802.1X Global Information - Edge-Core ES3510 Management Manual

3
Configuring the Switch

Displaying 802.1X Global Settings

The 802.1X protocol provides client authentication.
Command Attributes
• 802.1X System Authentication Control – The global setting for 802.1X.
Web – Click Security, 802.1X, Information.
CLI – This example shows the default global setting for 802.1X.
Console#show dot1x
Global 802.1X Parameters
system-auth-control: enable
802.1X Port Summary
Port Name Status
1/1 disabled
1/2 disabled
. .
.
802.1X Port Details
802.1X is disabled on port 1/1
. .
.
802.1X is disabled on port 1/10
Console#

Configuring 802.1X Global Settings

The 802.1X protocol provides port authentication. The 802.1X protocol must be
enabled globally for the switch system before port settings are active.
Command Attributes
• 802.1X System Authentication Control – Sets the global setting for 802.1X.
(Default: Disabled)
3-74

Figure 3-50 802.1X Global Information

Operation Mode
Single-Host
Single-Host
Mode
ForceAuthorized
ForceAuthorized
4-105
Authorized
n/a
n/a