Figure 248: Showing Snmp Views; Figure 249: Adding An Oid Subtree To An Snmp View - Edge-Core ECS4210-12P Web Management Manual

Chapter 13
| Basic Administration Protocols
Simple Network Management Protocol

Figure 248: Showing SNMP Views

To add an object identifier to an existing SNMP view of the switch's MIB database:
1.
Click Administration, SNMP.
2.
Select Configure View from the Step list.
3.
Select Add OID Subtree from the Action list.
4.
Select a view name from the list of existing views, and specify an additional OID
subtree in the switch's MIB database to be included or excluded in the view.
5.
Click Apply

Figure 249: Adding an OID Subtree to an SNMP View

To show the OID branches configured for the SNMP views of the switch's MIB
database:
1.
Click Administration, SNMP.
2.
Select Configure View from the Step list.
3.
Select Show OID Subtree from the Action list.
4.
Select a view name from the list of existing views.
– 392 –