Table of Contents
Advertisement
Chapter 13
| Basic Administration Protocols
Simple Network Management Protocol
Setting SNMPv3 Views
Figure 245: Configuring a Remote Engine ID for SNMP
To show the remote SNMP engine IDs:
1.
Click Administration, SNMP.
2.
Select Configure Engine from the Step list.
3.
Select Show Remote Engine from the Action list.
Figure 246: Showing Remote Engine IDs for SNMP
Use the Administration > SNMP (Configure View) page to configure SNMPv3 views
which are used to restrict user access to specified portions of the MIB tree. The
predefined view "defaultview" includes access to the entire MIB tree.
Parameters
These parameters are displayed:
Add View
◆
View Name – The name of the SNMP view. (Range: 1-64 characters)
◆
OID Subtree – Specifies the initial object identifier of a branch within the MIB
tree. Wild cards can be used to mask a specific portion of the OID string. Use the
Add OID Subtree page to configure additional object identifiers. (Range: 1-64
characters).
◆
Type – Indicates if the object identifier of a branch within the MIB tree is
included or excluded from the SNMP view.
– 390 –
Advertisement
Table of Contents
