Table of Contents
Advertisement
Interface Details
The attributes listed below apply to both port and trunk interface types. When a
trunk is listed, the descriptions apply to the first port of the trunk.
◆
Local Port/Trunk – Local interface on this switch.
◆
Port/Trunk ID Type – There are several ways in which a port may be identified.
A port ID subtype is used to indicate how the port is being referenced in the
Port ID TLV.
Table 27: Port ID Subtype
ID Basis
Interface alias
Port component
MAC address
Network address
Interface name
Agent circuit ID
Locally assigned
◆
Port/Trunk ID – A string that contains the specific identifier for the local
interface based on interface subtype used by this switch.
◆
Port/Trunk Description – A string that indicates the port or trunk description.
If RFC 2863 is implemented, the ifDescr object should be used for this field.
◆
MED Capability – The supported set of capabilities that define the primary
function(s) of the interface:
LLDP-MED Capabilities
■
Network Policy
■
Location Identification
■
Extended Power via MDI – PSE
■
Extended Power via MDI – PD
■
Inventory
■
Web Interface
To display LLDP information for the local device:
1.
Click Administration, LLDP.
2.
Select Show Local Device Information from the Step list.
3.
Select General, Port, or Trunk.
Chapter 13
Reference
IfAlias (IETF RFC 2863)
EntPhysicalAlias when entPhysicalClass has a value 'port(10)' or
'backplane(4)' (IETF RFC 4133)
MAC address (IEEE Std 802-2001)
networkAddress
ifName (IETF RFC 2863)
agent circuit ID (IETF RFC 3046)
locally assigned
– 369 –
| Basic Administration Protocols
Link Layer Discovery Protocol
Advertisement
Table of Contents
