Table of Contents
Advertisement
Chapter 3
| Basic Management Tasks
Managing System Files
Note:
Up to two copies of the system software (i.e., the runtime firmware) can be
stored in the file directory on the switch.
Note:
The maximum number of user-defined configuration files is limited only by
available flash memory space.
Note:
The file
"Factory_Default_Config.cfg"
management station, but cannot be used as the destination file name on the
switch.
Web Interface
To copy firmware files:
1.
Click System, then File.
2.
Select Copy from the Action list.
3.
Select FTP Upgrade, HTTP Upgrade, or TFTP Upgrade as the file transfer
method.
4.
If FTP or TFTP Upgrade is used, enter the IP address of the file server.
5.
If FTP Upgrade is used, enter the user name and password for your account on
the FTP server.
6.
Set the file type to Operation Code or Loader.
7.
Enter the name of the file to download.
8.
Select a file on the switch to overwrite or specify a new file name.
9.
Then click Apply.
Figure 7: Copy Firmware
If you replaced a file currently used for startup and want to start using the new file,
reboot the system via the System > Reset menu.
can be copied to a TFTP server or
– 72 –
Advertisement
Table of Contents
