Table of Contents
Advertisement
◆
Source IPv6 Address – An IPv6 source address or network class. The address
must be formatted according to RFC 2373 "IPv6 Addressing Architecture, " using
8 colon-separated 16-bit hexadecimal values. One double colon may be used in
the address to indicate the appropriate number of zeros required to fill the
undefined fields.
◆
Source Prefix-Length – A decimal value indicating how many contiguous bits
(from the left) of the address comprise the prefix (i.e., the network portion of
the address). (Range: 0-128 bits)
◆
Time Range – Name of a time range.
Web Interface
To add rules to a Standard IPv6 ACL:
1.
Click Security, ACL.
2.
Select Configure ACL from the Step list.
3.
Select Add Rule from the Action list.
4.
Select IPv6 Standard from the Type list.
5.
Select the name of an ACL from the Name list.
6.
Specify the action (i.e., Permit or Deny).
7.
Select the source address type (Any, Host, or IPv6-prefix).
8.
If you select "Host, " enter a specific address. If you select "IPv6-prefix, " enter a
subnet address and the prefix length.
9.
Click Apply.
– 301 –
Chapter 12
| Security Measures
Access Control Lists
Advertisement
Table of Contents
