Table of Contents
Advertisement
Displaying Memory Utilization
Resetting the System
Use the System > Memory Status page to display memory utilization parameters.
Parameters
The following parameters are displayed:
◆
Free Size – The amount of memory currently free for use.
◆
Used Size – The amount of memory allocated to active processes.
◆
Total – The total amount of system memory.
Web Interface
To display memory utilization:
1.
Click System, then Memory Status.
Figure 24: Displaying Memory Utilization
Use the System > Reset menu to restart the switch immediately, at a specified time,
after a specified delay, or at a periodic interval.
Command Usage
◆
This command resets the entire system.
◆
To retain all configuration information stored in non-volatile memory, click the
Save button prior to resetting the system.
◆
When the system is restarted, it will always run the Power-On Self-Test. It will
also retain all configuration information stored in non-volatile memory as
described under
"Saving the Running Configuration to a Local File" on page
Chapter 3
– 91 –
| Basic Management Tasks
Displaying Memory Utilization
73.
Advertisement
Table of Contents
