Table of Contents
Advertisement
Chapter 2
| Using the Web Interface
Navigating the Web Browser Interface
Table 4: Switch Main Menu
Menu
Configure Interface
Protocol
Configure Protocol
Add
Show
Configure Interface
Add
Show
IP Subnet
Add
Show
MAC-Based
Add
Show
Mirror
Add
Show
MAC Address
Static
Configure Global
Configure MAC Address
Add
Show
Dynamic
Configure Aging
Show Dynamic MAC
Clear Dynamic MAC
Mirror
Add
Show
(Continued)
Description
Sets the tunnel mode for any participating interface
Creates a protocol group, specifying supported protocols
Shows configured protocol groups
Maps a protocol group to a VLAN
Shows the protocol groups mapped to each VLAN
Maps IP subnet traffic to a VLAN
Shows IP subnet to VLAN mapping
Maps traffic with specified source MAC address to a VLAN
Shows source MAC address to VLAN mapping
Mirrors traffic from one or more source VLANs to a target port
Shows mirror list
Enable MAC address isolation globally on the switch
Configures static entries in the address table
Displays static entries in the address table
Sets timeout for dynamically learned entries
Displays dynamic entries in the address table
Removes any learned entries from the forwarding database and clears
the transmit and receive counts for any static or system configured
entries
Mirrors traffic matching a specified source address from any port on the
switch to a target port
Shows mirror list
– 50 –
Page
153
154
155
155
155
156
156
156
158
158
158
160
160
160
162
162
162
165
165
167
165
165
165
170
171
172
173
173
173
Advertisement
Table of Contents
