Table of Contents
Advertisement
◆
Intrusion Action – Sets the port's response to a failed authentication.
Block Traffic – Blocks all non-EAP traffic on the port. (This is the default
■
setting.)
Guest VLAN – All traffic for the port is assigned to a guest VLAN. The guest
■
VLAN must be separately configured (See
page
138) and mapped on each port (See
Ports" on page
273).
Supplicant List
◆
Supplicant – MAC address of authorized client.
Authenticator PAE State Machine
◆
State – Current state (including initialize, disconnected, connecting,
authenticating, authenticated, aborting, held, force_authorized,
force_unauthorized).
◆
Reauth Count – Number of times connecting state is re-entered.
◆
Current Identifier – Identifier sent in each EAP Success, Failure or Request
packet by the Authentication Server.
Backend State Machine
◆
State – Current state (including request, response, success, fail, timeout, idle,
initialize).
◆
Request Count – Number of EAP Request packets sent to the Supplicant
without receiving a response.
◆
Identifier (Server) – Identifier carried in the most recent EAP Success, Failure or
Request packet received from the Authentication Server.
Reauthentication State Machine
◆
State – Current state (including initialize, reauthenticate).
Web Interface
To configure port authenticator settings for 802.1X:
1.
Click Security, Port Authentication.
2.
Select Configure Interface from the Step list.
3.
Click Authenticator.
4.
Modify the authentication settings for each port as required.
Configuring 802.1X Port Authentication
– 329 –
Chapter 12
| Security Measures
"Configuring VLAN Groups" on
"Configuring Network Access for
Advertisement
Table of Contents
