Displaying Mvr Receiver Groups; Figure 347: Showing The Static Mvr Groups Assigned To A Port - Edge-Core ECS4210-12P Web Management Manual

Chapter 16
| Multicast Filtering
Multicast VLAN Registration
Displaying MVR
Receiver Groups

Figure 347: Showing the Static MVR Groups Assigned to a Port

Use the Multicast > MVR (Show Member) page to show the multicast groups either
statically or dynamically assigned to the MVR receiver groups on each interface.
Parameters
These parameters are displayed:
◆
Domain ID – An independent multicast domain. (Range: 1-5)
◆
Group IP Address – Multicast groups assigned to the MVR VLAN.
◆
VLAN – Indicates the MVR VLAN receiving the multicast service. Note that this
may be different from the MVR VLAN if the group address has been statically
assigned.
◆
Port – Shows the interfaces with subscribers for multicast services provided
through the MVR VLAN.
◆
Up Time – Time this service has been forwarded to attached clients.
◆
Expire – Time before this entry expires if no membership report is received
from currently active or new clients.
◆
Count – The number of multicast services currently being forwarded from the
MVR VLAN.
Web Interface
To show the interfaces associated with multicast groups assigned to the MVR VLAN:
1.
Click Multicast, MVR.
2.
Select Show Member from the Step list.
3.
Select an MVR domain.
– 514 –