Chapter 4
| Interface Configuration
Trunk Configuration
Displaying LACP
Settings and Status for
the Remote Side
Figure 59: Displaying LACP Port Internal Information
Use the Interface > Trunk > Dynamic (Configure Aggregation Port - Show
Information - Neighbors) page to display the configuration settings and
operational state for the remote side of a link aggregation.
Parameters
These parameters are displayed:
Table 8: LACP Remote Device Configuration Information
Parameter
Description
Partner Admin System
LAG partner's system ID assigned by the user.
ID
Partner Oper System
LAG partner's system ID assigned by the LACP protocol.
ID
Partner Admin
Current administrative value of the port number for the protocol Partner.
Port Number
Partner Oper
Operational port number assigned to this aggregation port by the port's
Port Number
protocol partner.
Port Admin Priority
Current administrative value of the port priority for the protocol partner.
Port Oper Priority
Priority value assigned to this aggregation port by the partner.
Admin Key
Current administrative value of the Key for the protocol partner.
Oper Key
Current operational value of the Key for the protocol partner.
Admin State
Administrative values of the partner's state parameters. (See preceding
table.)
Oper State
Operational values of the partner's state parameters. (See preceding table.)
– 126 –