About Disconnect Cause Types - Cisco TelePresence SX10 Reference Manual

Cisco TelePresence SX10

Introduction

About disconnect cause types

The following parameters are logged when a call is discon-
nected. The disconnect cause types are used in disconnect
events (xEvent).
Cisco TelePresence SX10 API Reference Guide CE9.1, JUNE 2017.
D15333.07
About the API xConfiguration
CauseValue
CauseType
CauseString
CauseCode
CauseOrigin
Example:
xEvent DisconnectEvent
*e CallDisconnect CauseValue: 1
CauseType: "LocalDisconnect"
CauseString: ""
OrigCallDirection: "outgoing"
RemoteURI: "firstname.lastname@company.com"
CallId: 89
CauseCode: 0
CauseOrigin: SIP
** end
xCommand
Proprietary. We recomend the use of CauseType and CauseCode.
Describes why the call was disconnected. The value space is { OtherLocal, LocalDisconnect,
UnknownRemoteSite, LocalBusy, LocalReject, InsufficientSecurity, OtherRemote, RemoteDisconnect,
RemoteBusy, RemoteRejected, RemoteNoAnswer, CallForwarded, NetworkRejected }
Describes the Cause Code.
The disconnect Cause Codes are defined in SIP and Q.850.
SIP, Q.850, internal.
186
API Reference Guide
xStatus Appendices Appendices
Copyright © 2017 Cisco Systems, Inc. All rights reserved.