Xcommand Call Ignore; Xcommand Call Join; Xcommand Call Reject; Xcommand Call Resume - Cisco TelePresence SX10 Reference Manual

Cisco TelePresence SX10

Introduction

xCommand Call Ignore

Turns off the ringtone for the incoming call. The call can still be answered.
Requires user role: ADMIN, USER
USAGE:
xCommand Call Ignore CallId: CallId
where
CallId: Integer (0..65534)
The CallID is returned when the xCommand Dial command is run. During a call you can
run the xStatus Call command to see the CallId.

xCommand Call Join

Internal usage only.
Requires user role: ADMIN, USER
USAGE:
xCommand Call Join CallId:
CallId
where
CallId: Integer (0..65534)

xCommand Call Reject

Reject incoming call. If no call id is specified, all incoming calls are rejected.
Requires user role: ADMIN, USER
USAGE:
xCommand Call Reject [CallId: CallId]
where
CallId: Integer (0..65534)
The CallID is returned when the xCommand Dial command is run. During a call you can
run the xStatus Call command to see the CallId.
Cisco TelePresence SX10 API Reference Guide CE8.2, SEPTEMBER 2016.
D15333.07
About the API xConfiguration xCommand xCommand

xCommand Call Resume

Resume a call that have been put on hold.
Requires user role: ADMIN, USER
USAGE:
xCommand Call Resume CallId:
where
CallId: Integer (0..65534)
The CallID is returned when the xCommand Dial command is run. During a call you can
run the xStatus Call command to see the CallId.

xCommand Call UnattendedTransfer

Transfers an ongoing call to another participant. Fully supported for SIP calls only.
Requires user role: ADMIN, USER
USAGE:
xCommand Call UnattendedTransfer CallId:
where
CallId: Integer (0..65534)
The CallID is returned when the xCommand Dial command is run. During a call you can
run the xStatus Call command to see the CallId.
Number: String (0, 255)
The number the call is transfered to.
103
API Reference Guide
xStatus Appendices
CallId
Number: "Number"
CallId
Copyright © 2016 Cisco Systems, Inc. All rights reserved.