Cisco TelePresence SX10
Introduction
UserInterface status
xStatus UserInterface
Shows the top level overview of the video status.
xStatus UserInterface ContactInfo ContactMethod [n] Number
Returns the system's active contact information. This address is used to reach this endpoint.
Value space of the result returned:
String
Example:
xStatus UserInterface ContactInfo ContactMethod Number
*s UserInterface ContactInfo ContactMethod 1 Number: "12345678"
** end
xStatus UserInterface ContactInfo Name
Returns the system's active contact name. The result depends on which protocol, if any, the
system is registered on. The automatically set contact name may have been overridden with the
command xConfiguration UserInterface ContactInfo Type. This results in a diagnostics warning
about contact mismatch.
Value space of the result returned:
String
Example:
xStatus UserInterface ContactInfo Name
*s UserInterface ContactInfo Name: "MySystem"
** end
xStatus UserInterface Extensions Widget [n] WidgetId
Returns the unique identifier for a widget in the touch controller user interface.
Cisco TelePresence SX10 API Reference Guide CE8.2, SEPTEMBER 2016.
D15333.07
About the API
xConfiguration
xCommand
Value space of the result returned:
String
xStatus UserInterface Extensions Widget [n] Value
Returns the value for a widget in the touch controller user interface. The value space depends
on the widget type. The value is an empty string until a value is set with the UserInterface
Extensions Widget SetValue command.
Value space of the result returned:
String
171
API Reference Guide
xStatus
xStatus
Appendices
Copyright © 2016 Cisco Systems, Inc. All rights reserved.