Cisco TelePresence SX10 Reference Manual page 126

Cisco TelePresence SX10

Introduction
Time commands
xCommand Time DateTime Get
Read the time and date from the system.
Requires user role: ADMIN, USER
USAGE:
xCommand Time DateTime Get
xCommand Time DateTime Set
Set the date and time for the system, if not available from NTP (Network Time Protocol).
Requires user role: ADMIN, USER
USAGE:
xCommand Time DateTime Set [Year: Year] [Month: Month] [Day: Day] [Hour: Hour]
[Minute: Minute] [Second: Second]
where
Year: Integer (2015..2037)
Month: Integer (1..12)
Day: Integer (1..31)
Hour: Integer (0..23)
Minute: Integer (0..59)
Second: Integer (0..59)
Cisco TelePresence SX10 API Reference Guide CE8.2, SEPTEMBER 2016.
D15333.07
About the API xConfiguration xCommand xCommand
UserInterface commands
xCommand UserInterface Extensions Widget SetValue
Set the value of the given widget. Updates the UserInterface Extensions status tree. Returns an
error if the value is out of range.
Requires user role: ADMIN
USAGE:
xCommand UserInterface Extensions Widget SetValue Value: "Value" WidgetId:
"WidgetId"
where
Value: String (0, 255)
The value of the widget. The range of values depends on the widget type.
WidgetId: String (0, 40)
The unique identifier for the widget.
xCommand UserInterface Extensions Widget UnsetValue
Empties the value of the given widget. Updates the UserInterface Extensions status tree and
notifies the user interface that this widget is no longer selected.
Requires user role: ADMIN
USAGE:
xCommand UserInterface Extensions Widget UnsetValue WidgetId: "WidgetId"
where
WidgetId: String (0, 40)
The unique identifier for the widget.
xCommand UserInterface Extensions Clear
Delete all user interface extensions (widgets) from the video system.
Requires user role: ADMIN
USAGE:
xCommand UserInterface Extensions Clear
126
API Reference Guide
xStatus Appendices
Copyright © 2016 Cisco Systems, Inc. All rights reserved.