Proximity Commands; Xcommand Proximity Services Activate; Xcommand Proximity Services Deactivate; Roompreset Commands - Cisco TelePresence SX10 Reference Manual

Cisco TelePresence SX10

Introduction

Proximity commands

xCommand Proximity Services Activate

Reactivate the Proximity services that were deactivated with xCommand Proximity Services
Deactivate.
Requires user role: ADMIN, USER
USAGE:
xCommand Proximity Services Activate

xCommand Proximity Services Deactivate

This command deactivates all proximity services on the endpoint. To reactivate proximity
services use the command xCommand Proximity Services Activate.
Requires user role: ADMIN, USER
USAGE:
xCommand Proximity Services Deactivate
Cisco TelePresence SX10 API Reference Guide CE8.2, SEPTEMBER 2016.
D15333.07
About the API xConfiguration xCommand xCommand

RoomPreset commands

xCommand RoomPreset Activate

Activate one of the locally stored presets.
Note that information about all video input sources, and pan, tilt, zoom and focus values for
all cameras are included in the same preset. In contrast, the xCommand Camera Preset
commands applies to individual cameras only.
Requires user role: ADMIN, USER
USAGE:
xCommand RoomPreset Activate PresetId:
where
PresetId: Integer (1..15)
The ID of the preset you want to activate.

xCommand RoomPreset Clear

Delete a preset.
Note that information about all video input sources, and pan, tilt, zoom and focus values for
all cameras are included in the same preset. In contrast, the xCommand Camera Preset
commands applies to individual cameras only.
Requires user role: ADMIN, USER
USAGE:
xCommand RoomPreset Clear PresetId:
where
PresetId: Integer (1..15)
The ID of the preset you want to delete.
121
API Reference Guide
xStatus Appendices
PresetId
PresetId
Copyright © 2016 Cisco Systems, Inc. All rights reserved.