Cisco TelePresence SX10 Reference Manual page 132

Cisco TelePresence SX10

Introduction
xCommand Video Layout LayoutFamily Set
Select the screen layout mode.
Requires user role: ADMIN, USER
USAGE:
xCommand Video Layout LayoutFamily Set [Target: Target] [: ] LayoutFamily:
LayoutFamily [CustomLayoutName: "CustomLayoutName"]
where
Target: local/remote
Select if the target is the local layout or the remote layout.
: Integer (0..65534)
The CallID is returned when the xCommand Dial command is run. During the call you
can run the xStatus Call command to see the CallId.
LayoutFamily: auto/custom/equal/overlay/prominent/single
Select a layout family.
CustomLayoutName: String (1, 128)
Enter a name for the layout.
xCommand Video PresentationPIP Set
Sets position for the presentation PiP (picture in picture).
Requires user role: ADMIN, USER
USAGE:
xCommand Video PresentationPIP Set Position:
where
Position: CenterLeft/CenterRight/LowerLeft/LowerRight/UpperCenter/UpperLeft/UpperRight
Select one of the predefined positions.
Cisco TelePresence SX10 API Reference Guide CE8.2, SEPTEMBER 2016.
D15333.07
About the API xConfiguration
Position
xCommand xCommand
xCommand Video PresentationView Set
Set the presentation view mode
Requires user role: ADMIN, USER
USAGE:
xCommand Video PresentationView Set View:
where
View: Default/Maximized/Minimized
Select Default when you want the presentation to be viewed with the default settings
for the codec. Select Maximized when you want the presentation to be displayed in full
screen. Select
Minimized when you want the presentation to be displayed in a small picture on screen.
xCommand Video Selfview Set
Sets self-view on/off and specifies its size and position. If the parameter is not specified,
current value is used.
Requires user role: ADMIN, USER
USAGE:
xCommand Video Selfview Set [Mode: Mode] [FullscreenMode: FullscreenMode]
[PIPPosition: PIPPosition] [OnMonitorRole: OnMonitorRole]
where
Mode: On/Off
Selfview is set to on or off.
FullscreenMode: On/Off
Choose between displaying the self-view in full screen or as picture-in-picture.
PIPPosition: CenterLeft/CenterRight/LowerLeft/LowerRight/UpperCenter/UpperLeft/UpperRight
Select the position for the self-view image.
OnMonitorRole: First/Fourth/Second/Third
Displays self-view on monitors with this role.
132
API Reference Guide
xStatus Appendices
View
Copyright © 2016 Cisco Systems, Inc. All rights reserved.