Xcommand Changes In Ce8.2 - Cisco TelePresence SX10 Reference Manual

Cisco TelePresence SX10

Introduction Introduction

xCommand changes in CE8.2

New commands
Audio VuMeter Start
Audio VuMeter Stop
Audio VuMeter StopAll
Security Session List
Security Session Terminate
Commands that are modified
Dial
OLD: Protocol: <H320 / Sip>
NEW: Protocol: <H320 / H323 / Sip / Spark>
Peripherals Connect
OLD: Role: <User;Admin>
NEW: Role: <User;Admin;RoomControl>
Peripherals HeartBeat
OLD: Role: <User;Admin>
NEW: Role: <User;Admin;RoomControl>
Peripherals Pairing Unpair
OLD: Role: <Admin>
NEW: Role: <User;Admin>
SystemUnit FactoryReset
OLD: Role: <Admin>
NEW: Role: <User;Admin>
SystemUnit OptionKey Remove
OLD: Type: <Encryption / PremiumResolution / RemoteMonitoring>
NEW: Type: <Encryption / RemoteMonitoring>
Time DateTime Set
OLD: Role: <Admin>
NEW: Role: <User;Admin>
Cisco TelePresence SX10 API Reference Guide CE8.2, SEPTEMBER 2016.
D15333.07
About the API xConfiguration xCommand
UserInterface Extensions Clear
OLD: Role: <Admin>
NEW: Role: <Admin;RoomControl>
UserInterface Extensions List
OLD: Role: <User;Admin>
NEW: Role: <User;Admin;RoomControl>
UserInterface Extensions Widget SetValue
OLD: Role: <Admin>
NEW: Role: <Admin;RoomControl>
UserInterface Extensions Widget UnsetValue
OLD: Role: <Admin>
NEW: Role: <Admin;RoomControl>
9
API Reference Guide
xStatus Appendices
Copyright © 2016 Cisco Systems, Inc. All rights reserved.