Xconfiguration Audio Input Microphone [2] Echocontrol Noisereduction; Xconfiguration Audio Input Microphone [2] Echocontrol Dereverberation; Xconfiguration Audio Input Microphone [2] Level; Xconfiguration Audio Input Microphone [1 - Cisco TelePresence SX10 Reference Manual

Cisco TelePresence SX10

Introduction

xConfiguration Audio Input Microphone [2] EchoControl NoiseReduction

The system has built-in noise reduction, which reduces stationary background noise, for
example noise from air-conditioning systems, cooling fans etc. In addition, a high pass filter
(Humfilter) reduces very low frequency noise. Noise reduction requires that Audio Input
Microphone [n] EchoControl Mode is enabled.
Requires user role: ADMIN
Default value: On
USAGE:
xConfiguration Audio Input Microphone
NoiseReduction
where
n
: Unique ID that identifies the microphone input. Range: 2..2
NoiseReduction
: Off/On
Off: Turn off the noise reduction.
On: Turn on the noise reduction. Recommended in the presence of low frequency noise.

xConfiguration Audio Input Microphone [2] EchoControl Dereverberation

The system has built-in signal processing to reduce the effect of room reverberation.
Dereverberation requires that Audio Input Microphone [n] EchoControl Mode is enabled.
Requires user role: ADMIN
Default value: Off
USAGE:
xConfiguration Audio Input Microphone
Dereverberation
where
n
: Unique ID that identifies the microphone input. Range: 2..2
Dereverberation
: Off/On
Off: Turn off the dereverberation.
On: Turn on the dereverberation.
Cisco TelePresence SX10 API Reference Guide CE8.2, SEPTEMBER 2016.
D15333.07
About the API xConfiguration xConfiguration
n EchoControl NoiseReduction:
n EchoControl Dereverberation:
xCommand

xConfiguration Audio Input Microphone [2] Level

Define the audio level of the Microphone input connector.
Requires user role: ADMIN
Default value: 17
USAGE:
xConfiguration Audio Input Microphone
where
n
: Unique ID that identifies the microphone input. Range: 2..2
Level
: Integer (0..24)
Select a value between 0 and 24, in steps of 1 dB.
xConfiguration Audio Input Microphone [1..2] Mode
Disable or enable audio on the microphone connector. Note that Microphone [1] is the video
system's internal microphone.
Requires user role: ADMIN
Default value: On
USAGE:
xConfiguration Audio Input Microphone
where
n
: Unique ID that identifies the microphone input. Range: 1..2
Mode
: Off/On
Off: Disable the audio input microphone connector.
On: Enable the audio input microphone connector.
49
API Reference Guide
xStatus Appendices
n Level: Level
n Mode: Mode
Copyright © 2016 Cisco Systems, Inc. All rights reserved.