Cisco TelePresence SX20 Codec
Introduction
xCommand Call FarEndControl Source Select
Select which video input source to use as the main source on the far end system.
Requires user role: ADMIN, USER
USAGE:
xCommand Call FarEndControl Source Select [CallId: CallId] SourceId:
where
CallId: Integer (0..65534)
The CallID is returned when the xCommand Dial command is run. During a call you can
run the xStatus Call command to see the CallId.
SourceId: Integer (0..15)
Select a video input source on the far end.
xCommand Call Hold
Put a call on hold.
Requires user role: ADMIN, USER
USAGE:
xCommand Call Hold [CallId: CallId] [Reason: Reason]
where
CallId: Integer (0..65534)
The CallID is returned when the xCommand Dial command is run. During a call you can
run the xStatus Call command to see the CallId.
Reason: Conference/Transfer/Other
Internal usage only.
SX20 Codec API Reference Guide CE8.1, APRIL 2016.
D15316.03
About the API
xConfiguration
xCommand
xCommand
xCommand Call Ignore
Turns off the ringtone for the incoming call. The call can still be answered.
Requires user role: ADMIN, USER
USAGE:
SourceId
xCommand Call Ignore CallId:
where
CallId: Integer (0..65534)
The CallID is returned when the xCommand Dial command is run. During a call you can
run the xStatus Call command to see the CallId.
xCommand Call Join
Internal usage only.
Requires user role: ADMIN, USER
USAGE:
xCommand Call Join CallId:
where
CallId: Integer (0..65534)
xCommand Call Reject
Reject incoming call. If no call id is specified, all incoming calls are rejected.
Requires user role: ADMIN, USER
USAGE:
xCommand Call Reject [CallId: CallId]
where
CallId: Integer (0..65534)
The CallID is returned when the xCommand Dial command is run. During a call you can
run the xStatus Call command to see the CallId.
97
API Reference Guide
xStatus
CallId
CallId
Copyright © 2016 Cisco Systems, Inc. All rights reserved.
Appendices