H323 Status; Xstatus H323; Xstatus H323 Gatekeeper Address; Xstatus H323 Gatekeeper Port - Cisco TelePresence SX10 Reference Manual

Application programming interface (api)
Hide thumbs Also See for TelePresence SX10:
Table of Contents

Advertisement

Cisco TelePresence SX10
Introduction

H323 status

xStatus H323

Shows the top level overview of the H323 status.

xStatus H323 Gatekeeper Address

Displays the IP address of the gatekeeper where the system is registered.
Value space of the result returned:
String
Example:
xStatus H323 Gatekeeper Address
*s H323 Gatekeeper Address: "192.0.1.20"
** end

xStatus H323 Gatekeeper Port

Shows the port which is used when connecting to on the gatekeeper.
Value space of the result returned:
Integer
Example:
xStatus H323 Gatekeeper Port
*s H323 Gatekeeper Port: 1719
** end

xStatus H323 Gatekeeper Reason

Shows the reason for rejected registration.
Value space of the result returned:
String
Example:
xStatus H323 Gatekeeper Reason
*s H323 Gatekeeper Reason: ""
** end
Cisco TelePresence SX10 API Reference Guide CE8.2, SEPTEMBER 2016.
D15333.07
About the API
xConfiguration
xCommand

xStatus H323 Gatekeeper Status

Shows the gatekeeper registration status.
Value space of the result returned:
Required/Discovering/Discovered/Authenticating/Authenticated/Registering/Registered/
Inactive/Rejected
Example:
xStatus H323 Gatekeeper Status
*s H323 Gatekeeper Status: Registered
** end

xStatus H323 Mode Reason

Shows whether there is a conflict between H.323 settings and xStatus H323 Mode Status.
"": When H.323 is set to On and there is no conflict between H.323 Mode configuration and
the rest of the system settings.
"SIP is enabled": When H.323 Mode is set to On and SIP is enabled on a system that does not
support the two simultaneously.
"Not available": When a system does not support H.323.
Value space of the result returned:
String
Example:
xStatus H323 Mode Reason
*s H323 Mode Reason: ""
** end

xStatus H323 Mode Status

Shows the status for H.323 registration.
Enabled: Registration is enabled.
Disabled: Registration is disable, because SIP is enabled.
Value space of the result returned:
Enabled/Disabled
Example:
xStatus H323 Mode Status
*s H323 Mode Status: "Disabled"
** end
152
API Reference Guide
xStatus
xStatus
Appendices
Copyright © 2016 Cisco Systems, Inc. All rights reserved.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Telepresence sx80

Table of Contents