Xconfiguration Network [1] Qos Mode; Xconfiguration Network [1] Qos Diffserv Audio - Cisco TelePresence SX10 Reference Manual

Application programming interface (api)
Hide thumbs Also See for TelePresence SX10:
Table of Contents

Advertisement

Cisco TelePresence SX10
Introduction

xConfiguration Network [1] QoS Mode

The QoS (Quality of Service) is a method which handles the priority of audio, video and data in
the network. The QoS settings must be supported by the infrastructure. Diffserv (Differentiated
Services) is a computer networking architecture that specifies a simple, scalable and coarse-
grained mechanism for classifying, managing network traffic and providing QoS priorities on
modern IP networks.
Requires user role: ADMIN
Default value: Diffserv
USAGE:
xConfiguration Network
QoS Mode:
n
where
n
: Index that identifies the network. Range: 1..1
Mode
: Off/Diffserv
Off: No QoS method is used.
Diffserv: When you set the QoS Mode to Diffserv, the Network QoS Diffserv Audio,
Network QoS Diffserv Video, Network QoS Diffserv Data, Network QoS Diffserv
Signalling, Network QoS Diffserv ICMPv6 and Network QoS Diffserv NTP settings are
used to prioritize packets.
Cisco TelePresence SX10 API Reference Guide CE8.2, SEPTEMBER 2016.
D15333.07
About the API
xConfiguration
xConfiguration
Mode
xCommand

xConfiguration Network [1] QoS Diffserv Audio

This setting will only take effect if Network QoS Mode is set to Diffserv.
Define which priority Audio packets should have in the IP network.
The priority for the packets ranges from 0 to 63 - the higher the number, the higher the priority.
The recommended class for Audio is CS4, which equals the decimal value 32. If in doubt,
contact your network administrator.
The priority set here might be overridden when packets are leaving the network controlled by
the local network administrator.
Requires user role: ADMIN
Default value: 0
USAGE:
xConfiguration Network
QoS Diffserv Audio:
n
where
n
: Index that identifies the network. Range: 1..1
Audio
: Integer (0..63)
Set the priority of the audio packets in the IP network - the higher the number, the
higher the priority. The default value is 0 (best effort).
64
API Reference Guide
xStatus
Appendices
Audio
Copyright © 2016 Cisco Systems, Inc. All rights reserved.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Telepresence sx80

Table of Contents