Xstatus Video Input Mainvideosource; Xstatus Video Input Source [N] Connectorid; Xstatus Video Input Source [N] Formatstatus; Xstatus Video Input Source [N] Formattype - Cisco TelePresence SX10 Reference Manual

Application programming interface (api)
Hide thumbs Also See for TelePresence SX10:
Table of Contents

Advertisement

Cisco TelePresence SX10
Introduction

xStatus Video Input MainVideoSource

Returns the local video input currently used as the main source. The main video source is set
with the xConfiguration Video DefaultMainSource command.
Value space of the result returned:
Integer
Example:
xStatus Video Input MainVideoSource
*s Video Input MainVideoSource: 1
** end

xStatus Video Input Source [n] ConnectorId

Shows the identifier of the connector that is associated with the input source.
Value space of the result returned:
Integer
Example:
xStatus Video Input Source 1 ConnectorId
*s Video Input Source 1 ConnectorId: 1
** end

xStatus Video Input Source [n] FormatStatus

Shows the resolution format status for the video input source.
Value space of the result returned:
Ok/OutOfRange/NotFound/Interlaced/Error/Unknown
Example:
xStatus Video Input Source 1 FormatStatus
*s Video Input Source 1 Resolution FormatStatus: Ok
** end
Cisco TelePresence SX10 API Reference Guide CE8.2, SEPTEMBER 2016.
D15333.07
About the API
xConfiguration
xCommand

xStatus Video Input Source [n] FormatType

Shows the resolution format type for the video input source.
Value space of the result returned:
Unknown/AnalogCVTBlanking/AnalogCVTReducedBlanking/AnalogGTFDefault/
AnalogGTFSecondary/AnalogDiscreteTiming/AnalogDMTBlanking/AnalogCEABlanking/Digital
Example:
xStatus Video Input Source 1 FormatType
*s Video Input Source 1 Resolution FormatType: Digital
** end

xStatus Video Input Source [n] MediaChannelId

For internal use only.
Value space of the result returned:
Integer
Example:
xStatus Video Input Source MediaChannelId
*s Video Input Source 1 MediaChannelId: 2
*s Video Input Source 2 MediaChannelId: 3
** end

xStatus Video Input Source [n] Resolution Height

Shows the resolution height (in pixels) for the video input source.
Value space of the result returned:
0..3000
Example:
xStatus Video Input Source 1 Resolution Height
*s Video Input Source 1 Resolution Height: 1080
** end
173
API Reference Guide
xStatus
xStatus
Appendices
Copyright © 2016 Cisco Systems, Inc. All rights reserved.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Telepresence sx80

Table of Contents