Operating Alarms On The Tp 177Micro; Displaying Alarms - Siemens SIMATIC HMI OP 73micro Operating Instructions Manual

Operating alarms

9.3 Operating alarms on the TP 177micro

Result
The system executes the additional functions of the alarm. You may find additional
information on this in your plant documentation.
Note
When you edit an unacknowledged alarm, it is acknowledged automatically.
See also
Displaying alarms (Page 128)
9.3 Operating alarms on the TP 177micro
9.3.1

Displaying alarms

Alarm view and alarm window
Alarms are indicated in the alarm view or in the alarm window on the HMI device.
The layout and operation of the alarm window correspond to that of the alarm view.
The alarm window is independent of the process screen. Depending on the configuration,
the alarm window appears automatically as soon as a new, unacknowledged alarm has been
received. The alarm window can be configured so that it only closes after all the alarms have
been acknowledged.
Further information on this may be available in your plant documentation.
132
OP 73micro, TP 177micro (WinCC flexible)
Operating Instructions, 09/2007, 6AV6691-1DF01-0AB0