Viewing Information About The Version Of The Hmi Device Image; Settings" Menu; Overview - Siemens SIMATIC HMI OP 73micro Operating Instructions Manual

6.1.2.4

Viewing information about the version of the HMI device image

Requirements
"Info/Settings ▶ Version Info" was selected from the Loader menu.
Principle
Version Info
01.00.00.00_05.08
BL 0.17/2004-xx-xx
Figure 6-6
The "Version Info" dialog shows information on the Bootloader and the HMI device image file
and therefore the version of the operating system.
This information is required when you contact A&D Technical Support.
6.1.3

"Settings" menu

6.1.3.1

Overview

Requirement
"Info/Settings ▶ Logon/Settings" was selected from the Loader menu. You have entered the
password for the "Settings" menu.
"Settings" menu
Settings
Startup Delay
Screensaver
---------------
Figure 6-7
"Startup Delay"
"Screen Saver"
"Password"
"Transfer Settings"
Select the "Settings" menu to edit the system settings for your HMI device.
Access to this menu can be protected by a password.
OP 73micro, TP 177micro (WinCC flexible)
Operating Instructions, 09/2007, 6AV6691-1DF01-0AB0
"Version Info" dialog – Example
"Settings" menu
Menu command for setting the startup delay on the HMI device
Menu command for the screen saver
Menu command for the password
Menu command for transfer settings
6.1 Configuring the operating system for the OP 73micro
Configuring the operating system
75