Introduction - Siemens SIMATIC HMI OP 73micro Operating Instructions Manual

Introduction

Purpose of the operating instructions
This operating instruction manual provides information based on the requirements defined by
DIN 8418 for mechanical engineering documentation. This information relates to the device,
its place of use, transport, storage, installation, use and maintenance.
These operating instructions are intended for:
● Users
● Commissioning engineers
● Service technicians
● Maintenance technicians
Please read the section "Safety instructions and general notes" carefully.
The help integrated in WinCC flexible, the WinCC flexible Information System, contains
detailed information. The Information System contains instructions, examples and reference
information in electronic form.
Basic knowledge required
General knowledge of automation technology and process communication is needed to
understand the operating instructions.
It is also assumed that those using the manual have experience in using personal computers
and knowledge of Microsoft operating systems.
Operating instructions' range of validity
The operating instruction manual applies to the OP 73micro and TP 177micro HMI devices in
connection with the WinCC flexible software package.
OP 73micro, TP 177micro (WinCC flexible)
Operating Instructions, 09/2007, 6AV6691-1DF01-0AB0
3