Glossary - Siemens SIMATIC HMI OP 73micro Operating Instructions Manual

Glossary

Acknowledge
Acknowledging an alarm confirms that you have noted it.
AG
Controller of the SIMATIC S5 series such as the AG S5-115U, for example
Alarm logging
Output of user-specific alarms to a printer, in parallel to their output to the HMI device
screen.
Alarm, acknowledging
Acknowledgement of an alarm confirms that it has been noted.
Alarm, activated
Moment at which an alarm is triggered by the controller or HMI device.
Alarm, deactivated
Moment at which the initiation of an alarm is reset by the controller.
Alarm, user-specific
A user-specific alarm can be assigned to one of the following alarm classes:
● Error
● Warning
● User-specific alarm classes
A user-specific alarm designates a certain operating status of the plant connected to the HMI
device via the controller.
AS
Controller of the SIMATIC S7 series such as a SIMATIC S7-300
OP 73micro, TP 177micro (WinCC flexible)
Operating Instructions, 09/2007, 6AV6691-1DF01-0AB0
177