Entering And Modifying Date And Time - Siemens SIMATIC HMI OP 73micro Operating Instructions Manual

Operating a project
8.2 Operating a project on TP 177micro
Procedure
Set symbolic values with the help of the symbolic screen keyboard.
Proceed as follows:
1. Touch the relevant IO field on the screen.
2. Select an entry from the selection list.
3. Select
8.2.3.5

Entering and modifying date and time

Entering the date and time
Enter the date and time in the same way you enter alphanumerical values.
Note
When entering the date and time, please note that the format is determined by the
configured project language.
See also
Entering and editing alphanumerical values (Page 120)
Setting the project language (Page 116)
122
The symbolic screen keyboard opens and displays the current value.
The following options for selecting the entry are available:
– Position the cursor directly on the entry in the selection list by touching the entry.
– Move the cursor to an entry in the selection list using the
keys.
– Select to view the infotext of the symbolic IO field.
This button is only enabled if infotext has been configured for the symbolic IO field.
to confirm your entries or cancel them with
screen keyboard.
,
. Both actions close the
OP 73micro, TP 177micro (WinCC flexible)
Operating Instructions, 09/2007, 6AV6691-1DF01-0AB0
, or