Clearing The Mac Address Table - Siemens RUGGEDCOM WIN5123 User Manual

RUGGEDCOM WIN
User Guide
Figure 82: MAC Address Table Screen
2. In the Aging time [300-1800] sec parameter, set the MAC address aging time. This is the time until table
entries are removed from the MAC address table. Type a value in the range of 300 to 1800 seconds.
3. Click Apply.
Section 5.17.3

Clearing the MAC Address Table

The MAC Address Table displays the MAC addresses learned by the SS. To clear the MAC Address Table, do the
following:
1. Navigate to Network » Ethernet Settings » MAC Address Table. The MAC Address Table screen appears.
Figure 83: MAC Address Table Screen
Clearing the MAC Address Table
Chapter 5
Setup and Configuration
87